Introducing a Breakthrough in 2D Scaling

Applied Materials has introduced a breakthrough in materials engineering: selective tungsten deposition.

The shrinking of feature sizes with EUV lithography is exacerbating contact resistance in the crucial, first level of wiring that connects the transistor to the rest of the wiring in the chip. This has become the fundamental challenge to continued 2D scaling: as the interconnect wiring gets thinner, resistance increases. The industry needs new materials and materials engineering techniques that offer new ways to scale.

As I explained in my previous blogs, transistor contacts are formed in ever-smaller vias where a titanium nitride liner-barrier and tungsten nucleation layers are formed and then filled with tungsten contact metal. The liner-barrier provides adherence to the via sidewall while the nucleation layer permits bulk tungsten to grow. In my last blog, I used the analogy of painting a wooden fence: a primer layer and thin, first coat is applied to ensure the thicker, second coat applies smoothly and adheres without peeling (see Figure 1).

Figure 1: Applied’s Selective Tungsten (W) process technology eliminates the need for titanium nitride (TiN) liner-barriers so the entire contact via can be filled with conducting metal.

This decades-old approach has become a critical challenge to continued 2D scaling because the liner-barrier does not scale, leaving less space for tungsten conductor metal with each successive node. The thinner the tungsten conductor, the higher the resistance. 

At the 7nm foundry node, the contact via is about 20nm in diameter. The liner-barrier and nucleation layers occupy approximately 75 percent of the via’s volume, leaving only around 25 percent for tungsten. The increasing resistance offsets the performance potential of having a greater number of smaller and more advanced transistors, and the issue only becomes worse as the vias continue to shrink at the 5nm node and beyond.

To solve this bottleneck to continued 2D scaling and PPAC, Applied has developed a breakthrough called selective tungsten deposition that gives chipmakers an entirely new way to build the transistor contacts. The new process enables chipmakers to eliminate the liner-barrier and nucleation layers—and selectively fill the entire via with low-resistance tungsten.  Applied’s new selective process is like 3D printing at the atomic scale (see Figure 2).

Conventional Approach
Metal Volume Reduced by Liner-Barrier and Nucleation Layer
Selective Process
Metal Volume Maximized Using Bottom-Up Growth
Figure 2: The Selective Tungsten process grows bottom-up from the underlying metal to achieve void-free and seam-free gap fill, without the cladding required by conventional tungsten CVD.


The selective deposition is enabled by the new Endura® Volta™ Selective Tungsten CVD system. It’s an Integrated Materials Solution in which the wafer travels through multiple high-vacuum chambers that are many times cleaner than the cleanroom itself. Atomic-level surface treatments are applied to the wafer to remove all atomic-level impurities, and tungsten atoms are made to selectively adhere to the bottom of the via only and then fill the via from the bottom up with no delamination, voids or seams which could negatively impact power consumption, performance and yield (see Figure 3).

Figure 3: The Integrated Materials Solution on the Endura® platform allows the wafer to undergo multiple processes without ever breaking vacuum. This pristine process environment is critical to achieving selective tungsten deposition.


The result is a contact with a larger volume of tungsten and a clean metal-to-metal interface to the underlying metal, resulting in a significant reduction in contact resistance. Removing the resistance bottleneck makes it is easier for electrons to flow, which translates to improved device power and performance.

The ability to deploy this high-precision process in high-volume manufacturing is a huge feat of materials engineering. Consider that each contact is just 1/2,000th the width of a human hair and that there are hundreds of billions of contacts on every die, which translates to more than 100 kilometers of tungsten contact wiring on every wafer.

The Integrated Materials Solution is key to achieving deposition precision and reliability in high volume production. The technology solves a tungsten deposition challenge that has eluded the industry for over 30 years.

The new Endura system for selective tungsten deposition is being used by multiple leading customers worldwide and is on the roadmap to enable several generations of continued 2D scaling.

Applied Materials believes selective processing—both deposition and removal—will be key enablers of continued 2D scaling and of 3D architectures that add a new dimension to bit and transistor density scaling.

Stay tuned for my next and final blog in this series which will discuss how the new Endura system for selective tungsten extends Applied’s selective processing portfolio—a collection of innovative technologies that allow chipmakers to create, shape and modify materials in entirely new ways to enable continued advances in PPAC.

קבלו עדכונים ישירות למייל!

הירשמו עכשיו

רוצים להצטרף לדיון?

הוסף תגובה:*

* התגובות חייבות לעמוד בהנחיות הדיון ובכללי התקשורת שלנו.

ניתן ליצור איתנו קשר גם באמצעות מילוי טופס זה ונחזור אליכם בהקדם.